Optics
DHD410S Service Manual
62
020-001481-01 Rev. 1 (10-2018)
5. To disassemble the sealing cover, remove three M3 screws with a Phillips #1 screwdriver.
6. To release the color wheel module, remove the three M3 screws with a Phillips #1 screwdriver.
7. Replace the color wheel.
8. To re-install, follow these steps in reverse order.
Replacing the light engine
To remove the light engine, complete the following steps.
1. Remove the top cover.
2. Remove the main board.
Replacing the light engine must be done in a clean room.
Summary of Contents for DHD410S
Page 1: ...Christie DHD410S Service Manual 020 001481 01...
Page 77: ......
