Christie DHD410S, Service Manual

Page: 19 / 77

Service setups
DHD410S Service Manual 19
020-001481-01 Rev. 1 (10-2018)
Running a VGA1-In/YPbPr Connector port performance test
To verify the DVI port functionality, conduct a performance test on the DVI port.
To perform th
e VGA1-In/YPbPr Connector port p
erformance test, complete the following steps.
1. Connect the projector and video generator using a DVI cable.
2. Switch the signal source to
VGA1
.
The image of video generator is projected.
Running a remote port performance test
To verify the remote port functionality, conduct a performance test on the remote port.
To perform the remote port performance test, complete the following steps.
1. Connect the projector and remote controller using an audio cable.
2. On the IR remote, press
Menu .
The image of on-screen display menu is projected.
Performing a network function test on the
network port
The following browsers are supported for this test:
• Internet Explorer: version 11 or higher is required.
ID Part name Description
1 Test equipment Video generator
2 Test signal General-1, 1024 x 768 @60Hz
3 Inspection item VGA1-In/YPbPr Connector port performance test
4 Inspection distance 1.8 to 2.2 m
5 Criteria No abnormal color performance, line distortion, or noise exist on the screen
ID Part name Description
1 Test equipment Remote controller
2 Test signal None
3 Inspection item
Wired remote port performance test
4 Inspection distance 1.8 to 2.2 m
5 Criteria To confirm that it can power on/off the projector, on the remote controller,
press ON .