Christie DHD410S, Service Manual

Page: 71 / 77

Printed circuit boards and sensors
DHD410S Service Manual 71
020-001481-01 Rev. 1 (10-2018)
5. On the main board, remove the four M3 screws with a Phillips #1 screwdriver securing the main
board module.
6. Remove four screws to separate main board module from the bottom shielding.
I LD IF FPC Cable
J DMD FAN
Composed of red, blue, and black wires, a
white connector, and a black wire tube (three
pin)
K SYS FAN3
Composed of white, yellow, red, black, and gray
wires, a white connector, and a black wire tube
(five pin)
L SYS FAN2
Composed of red, yellow, and black wires, a
white connector, and a black wire tube (three
pin)
M SYS FAN1
Composed of red, yellow, and black wires, a
white connector, and a black wire tube (three
pin)
Item Male connector on
connector board
Description Figure