Service setups
DHD410S Service Manual
24
020-001481-01 Rev. 1 (10-2018)
Projector Setting
1. Power on projector.
2. Connect the PC and Projector by mini USB Cable.
3. Connect the PC and Projector by VGA Cable.
Setup TouchDriver Procedure
1. Double click
LCTv.1.6.3.exe
to install the application.
2. After install the application, a USB driver need to install, click
Install from a list or specific
location (Advanced)
”.
3. Click
Don’t search. I will choose the driver to install
to install the USB driver.
IR camera calibration
1. On the PC, click
LCT
.
2. Select
Pen Mode
in
Operation Mode
.
3. Select
Auto
in
Calibration
.
4. When the process is complete, click
OK
.
5. Please touch the target marks on the screen. (If you
would like exit calibration process, please
use the “ESC” key) After the 9th point of calibration is finished, please wait for 2 seconds while
calibration data is saved,
then touch is ready for use.
Please download “LCTv.1.6.3.exe” first.
• For IR camera test need the special pen:75.73901G001
• If use the XP system, install“Microsoft.NET” first
•
If the “auto Calibration still failed” message
appears on screen, please change
to manual
calibration mode.
Summary of Contents for DHD410S
Page 1: ...Christie DHD410S Service Manual 020 001481 01...
Page 77: ......
