Service guidelines
DHD410S
Service Manual
11
020-001481-01 Rev. 1 (10-2018)
Physical operating environment
Provides specifications for the operating environment.
Class A emissions limits
This Class A digital apparatus meets all requirements of the Canadian Interference - Causing
Equipment Regulations.
Laser safety warnings
This projector is a Class 2 laser device that conforms with IEC 60825-1:2007 and CFR 1040.10 and
1040.11.
Operating temperature range
0 to 2500 ft: to 5 to 40°C (41 to 104°F)
2500 to 5000 ft: 5 to 35°C (41 to 95°F)
5000 to 10,000 ft: 5 to 30°C (41 to 86°F)
Operating altitude
10,000 ft maximum
Humidity (non-condensing)
10 to 85% RH
Warning!
Failure to comply with the following could result in death or serious injury.
• No direct exposure to beam shall be permitted.
• This projector has a built-in Class 4 laser module. Never attempt to disassemble or modify the
projector.
• Any operation or adjustment not specifically instructed in the User manual creates the risk of
hazardous laser radiation exposure.
• Do not open or disassemble the projector as this may cause damage from exposure of laser
radiation.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam must be
permitted.
• Follow the control, adjustment, or operation procedures to avoid damage or injury from exposure
of laser radiation.
• The instructions for the assembly, operation, and maintenance include clear warnings concerning
precautions to avoid possible exposure to hazardous laser radiation.
Summary of Contents for DHD410S
Page 1: ...Christie DHD410S Service Manual 020 001481 01...
Page 77: ......
