Christie CP2306-RGBe User Manual Download Page 19

Page: 19 / 99

Introduction

CP2306-RGBe, CP2308-RGBe, CP2310-RGBe User Manual

020-001835-02 Rev. 1 (05-2021)

Left navigation menu

—

Access permissions

determine the available options.

Turns the light on or off.

Current access permissions.

Opens and closes the douser.

Projector name and IP address.

Turns test patterns on or off.

Current date and time.

Displays channels.

System status

—

To display all alarms, tap the

colored icon.

Displays macros.

Turns the projector on or off.

Playback controls

—

See Loading and playing content (on

page32).

Technical support for Cinema products is available at:

•

[email protected]

•

+1-877-334-4267

•

Professional Services: +1-800-550-3061 or

[email protected]

Summary of Contents for CP2306-RGBe



































































































Search results

Summary of Contents for CP2306-RGBe

Reviews:

Related manuals for CP2306-RGBe

Brands by name

Popular brands

Christie CP2306-RGBe, User Manual

Search results

Summary of Contents for CP2306-RGBe

Reviews:

Related manuals for CP2306-RGBe

Brands by name

Popular brands