1. Remove the top cover (on page 34).
2. Remove the electronics-side cover (on page 36).
3. Remove the user interface module (on page 60).
4. Remove the four screws securing the aluminum duct to the fans.
5. Remove the aluminum duct.
6. Remove the two screws from the affected fan and remove the fan.
7. Replace the fan.
8. To install the user interface intake fans, repeat these steps in reverse order.
Replacing the lamp driver intake fan (#21)
The lamp driver intake fan (#21) provides the intake cooling for the six lamp driver modules.
Estimated replacement time: 5 minutes
Ventilation and cooling
Boxer 4K Service Guide
48
020-101699-04 Rev. 1 (02-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for Boxer 30
Page 1: ...Service Guide 020 101699 04 Boxer 4K...
Page 113: ......