Projector covers and
feet
Learn how to remove the covers and feet of the projector.
Removing the filter doors
The electronics-side and lamp-side filter doors are located at the front of the projector.
Estimated replacement time:
1. Using a M4 screwdriver, loosen the two screws securing the filter door.
2. Pull out the filter door.
3. Repeat steps 1 and 2 for the other filter door.
4. If required, replace one or both filter doors.
5. To install the filter doors, repeat these steps in reverse order.
Replacing the captive lock screws
The captive lock screws secure the projector covers to the projector.
Estimated replacement time: 10 minutes
Boxer 4K Service Guide
31
020-101699-04 Rev. 1 (02-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for Boxer 30
Page 1: ...Service Guide 020 101699 04 Boxer 4K...
Page 113: ......