Left Side
Right Side
Top
Middle
Bottom
B1
B2
B3
A1
A2
A3
A3
B1
A2
A1
B2
B3
8. Remove two screws from the stack of the lamp drivers that contains the one to be replaced.
9. Disconnect the two harnesses.
10. Slide it to the side to remove the driver.
11. Disconnect the third harness.
12. The lamp driver module comes out as a stack.
13. Remove the failed lamp driver.
14. Install the new lamp driver.
15. To reassemble the projector, follow these steps in reverse order.
Replacing the power supply module
The power supply module provides the required voltages for operating the electronics in the projector.
Estimated replacement time: 10 minutes
Electronics
Boxer 4K Service Guide
66
020-101699-04 Rev. 1 (02-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for Boxer 30
Page 1: ...Service Guide 020 101699 04 Boxer 4K...
Page 113: ......