Replacing the lamp driver
Each lamp driver provides the energy required to drive one lamp module in the projector.
Estimated replacement time: 10 minutes for servicing a single lamp driver
1. Remove the top cover (on page 34).
2. Remove the rear cover (on page 35).
3. Disconnect the four connections to the lamp driver, J70, J78, the lamp driver power inline, and
the lamp cartridge inline.
4. Loosen the four captive screws from the top of the lamp driver module.
5. Pull the lamp driver module out the rear of the projector.
6. Remove the three screws to open the lamp driver housing cover.
7. Locate the lamp driver to replace.
Electronics
Boxer 4K Service Guide
65
020-101699-04 Rev. 1 (02-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for Boxer 30
Page 1: ...Service Guide 020 101699 04 Boxer 4K...
Page 113: ......
