1. Remove the front filter doors (on page 31).
2. Using a M4 screwdriver, remove the six screws securing the front cover.
3. Remove the front cover.
4. If required, replace the front cover.
5. To install the front cover, repeat these steps in reverse order.
The lens boot must be properly re-aligned before securing the front cover.
Removing the top cover
The top cover provides access to the light engine, HKBA board, and various other components.
Estimated replacement time: 1 minute
1. Loosen the six captive screws securing the top cover.
2. Remove the top cover.
3. If required, replace top cover.
4. To install the top cover, repeat these steps in reverse order.
Projector covers and feet
Boxer 4K Service Guide
34
020-101699-04 Rev. 1 (02-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for Boxer 30
Page 1: ...Service Guide 020 101699 04 Boxer 4K...
Page 113: ......
