manualshive.com logo in svg

Christie Boxer 30, Service Manual

The Christie Boxer 30 is a powerful projector designed for high-performance applications. For comprehensive maintenance and troubleshooting, make sure to download the free Service Manual from manualshive.com. This manual provides detailed instructions on how to optimize the performance of your Christie Boxer 30 for unparalleled viewing experiences.

Share
Download
background image

Projector covers and feet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Removing the filter doors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Replacing the captive lock screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Removing the front cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Removing the top cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Removing the rear cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Removing the optics-side cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Removing the electronics-side cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Removing the bottom cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Replacing a projector's foot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Filtration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Replacing the front air filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Replacing the user interface air filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Replacing the laminar airflow device filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Ventilation and cooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Replacing the lamp blower fans (#1, 2, 3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Replacing the lamp blower fans (#4, 5, 6). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Replacing the lamp fans (#7, 9, 11). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Replacing the lamp fans (#8, 10, 12). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Replacing the radiator fans (#13, 14, 15, and 16). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Replacing the HIP blower fans (#17 and 18). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Replacing the side intake duct. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Replacing the side intake fans (#19 and 20). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Replacing the lamp driver intake fan (#21). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Replacing the lamp driver exhaust fan (#22). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Replacing the green fan (#23). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Replacing the red blower fan (#24). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Replacing the blue fan (#25). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Removing the laminar airflow device blower fans (#26 and 27). . . . . . . . . . . . . . . . . . . . . . 52
Replacing the lamp duct housing fans (#28 and 29). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Replacing the card cage exhaust fans (#30 and 31). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Replacing the power supply module fans. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Removing the laminar airflow device blower module . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Replacing the liquid cooling module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Replacing the radiator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Electronics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Content

Boxer 4K Service Guide

4

020-101699-04 Rev. 1 (02-2018)

Copyright 

©

 2018 Christie Digital Systems USA, Inc. All rights reserved.

Summary of Contents for Boxer 30


















































































































Reviews:

No comments

Related manuals for Boxer 30

Marantz VP4001 Specifications preview
VP4001
Brand: Marantz Pages: 2
Clay Paky Stage Zoom 1200 Instruction Manual preview
Stage Zoom 1200
Brand: Clay Paky Pages: 6
Da-Lite Ascender Electrol Instruction Book preview
Ascender Electrol
Brand: Da-Lite Pages: 8
OzCharge OC-LVD50 Installation Instructions And User Manual preview
OC-LVD50
Brand: OzCharge Pages: 2
Somogyi Elektronic home DL IP 3 Instruction Manual preview
home DL IP 3
Brand: Somogyi Elektronic Pages: 12
UCHIDA Wivia 3 Quick Installation Manual preview
Wivia 3
Brand: UCHIDA Pages: 6
BenQ MP610 - SVGA DLP Projector User Manual preview
MP610 - SVGA DLP Projector
Brand: BenQ Pages: 55
Panasonic PT-D5600 Spec File preview
PT-D5600
Brand: Panasonic Pages: 8
Barco R767302K Instructions Manual preview
R767302K
Brand: Barco Pages: 38
TOWOND M8-TPH Quick User Manual preview
M8-TPH
Brand: TOWOND Pages: 20
Panasonic PT-D5600U Specifications preview
PT-D5600U
Brand: Panasonic Pages: 6
Panasonic PT-51D31CE Service Manual preview
PT-51D31CE
Brand: Panasonic Pages: 18
Panasonic PT-65WX50 Operating Instructions Manual preview
PT-65WX50
Brand: Panasonic Pages: 36
Panasonic PT-47WX49 Operating Instructions Manual preview
PT-47WX49
Brand: Panasonic Pages: 29
Panasonic PT-51SX60 Operating Instructions Manual preview
PT-51SX60
Brand: Panasonic Pages: 48
Panasonic PT-47WX51KR (Korean) Owner'S Manual preview
PT-47WX51KR
Brand: Panasonic Pages: 38
Panasonic PT-61XF60 Operating Instructions Manual preview
PT-61XF60
Brand: Panasonic Pages: 76
Panasonic PT-105 Service Manual preview
PT-105
Brand: Panasonic Pages: 88

Brands by name

Popular brands

Load more brands