Freeze-dryer Gamma 1-16 LSCplus
Freeze-dryer Gamma 2-16 LSCplus
6 Operation
Version 04/2013, Rev. 2.10 of 09/03/2020
• sb-dc
81 / 126
Translation of the original operating manual
6.5.3.3
Copying a program
If a new program is to be created based on an already existing program,
the already existing program can be copied. A free program storage
location must be available for this purpose.
• Select the program to be copied from the list in the main window
"Program".
• Press the button with the program name in order to call up a window
with the program data.
• Press the button “Copy program” in order to create a copy of the
existing program.
• Edit and save the copy (see chapter 6.5.3.1 - "Creating a program").
• Close the dialog box by pressing the “Program” button.
The program will be automatically assigned to the first free program storage
location.
6.5.3.4
Loading a program
If a freeze-drying process is to be executed and controlled by a program,
the program must be loaded.
• Call up the main window "Program". This window includes a list of all
the programs that are saved.
• Press the button "Load" behind the program name. A dialog box will be
displayed in which the start section, the start time or the start
temperature can be adapted to any specific needs. The "Info" button
can be used to call up a brief description of the active program,
including information concerning the remaining runtime and the end of
the program. It also enables a graphical representation of the process
sequence.
Fig. 64: Dialog box "Load program"
• Press the button "Load" in order to accept the program data. The
display switches to the standard user interface.
• Press the button "Program start" in order to start the freeze-drying
process.