Freeze-dryer Gamma 1-16 LSCplus
Freeze-dryer Gamma 2-16 LSCplus
6 Operation
Version 04/2013, Rev. 2.10 of 09/03/2020
• sb-dc
67 / 126
Translation of the original operating manual
Maintenance (5)
The maintenance interval of the unit is fixed at 3,000 operating hours or at
least one maintenance per year.
When the end of a maintenance interval is reached, a corresponding
message will be displayed.
• Acknowledge the message.
• Make an appointment for the maintenance of your freeze-dryer (see
section 8 "Maintenance and service").
• After the maintenance, our service engineer will reset the operating
hour counter in the dialog box "Maintenance".
Fig. 50: Dialog box "Maintenance"
Sensor adjustment (6)
In this dialogue box, the sensors are adjusted based on a predefined
reference value.
CAUTION
Sensors that are not properly adjusted will lead to incorrect
measurements which, in turn, will have a negative effect on the process
control.
NOTE
Only specialised personnel are authorised to perform the sensor
adjustment.
