Freeze-dryer Gamma 1-16 LSCplus
Freeze-dryer Gamma 2-16 LSCplus
6 Operation
80 / 126
Version 04/2013, Rev. 2.10 of 09/03/2020
• sb-dc
Translation of the original operating manual
Program templates (2)
The PGMplus programmer module offers 14 different program templates
that include recipes for all kinds of freeze-drying applications. They are
suggestions for orientation purposes and must be adapted to the specific
area of application of the freeze-dryer.
Following the selection of a program template, a window containing
information concerning the drying process will be displayed.
Fig. 63: Information concerning the program template
(here: a recipe for nutrient media/bacteria)
After the conformation of the information, the program template will be
displayed.
• Similar to a blank program, sections can be added or deleted and the
set values can be adapted accordingly.
6.5.3.2
Editing a program
An existing program can be modified as long as it has not been loaded.
• Select the program to be edited from the list in the main window
"Program".
• Press the button with the program name in order to call up a window
that displays the program data.
• Perform the desired modifications and save the program (see chapter
6.5.3.1 - "Creating a program").
• Close the dialog box by pressing the "Program" button.
The program has now been changed in the existing program storage
location.
NOTE
It is possible to switch to the manual mode during a program run, e.g. in
order to edit a program during the runtime. The point of time for continuing
the program run can be defined by selecting the desired start section and
a start time.
