Freeze-dryer Gamma 1-16 LSCplus
Freeze-dryer Gamma 2-16 LSCplus
6 Operation
Version 04/2013, Rev. 2.10 of 09/03/2020
• sb-dc
47 / 126
Translation of the original operating manual
Status line (1)
This line shows the operating status of the freeze-dryer as well as the
active phase.
The status line also shows the current date and time. The clock is battery-
buffered and must be reset after a failure (chapter 6.5.1.3 - "Main window
"Options "", section "Administration"").
In addition, the drive symbol provides information concerning the status of
the external data storage device or of the network drive. The following
symbols are possible:
...
No symbol
No USB storage device or LAN network connected
USB storage device connected
Process recording on a USB storage device active
Network available, but no network drive connected
Network drive connected (e.g. LPCplus, LyoLogplus)
Network drive connected and process recording active
Set process values (2)
In the manual mode, the set values for the individual phases of the freeze-
drying process must be entered prior to the start of the process. Value
ranges have been saved for the various phases. These value ranges can
be displayed in the input window with the aid of the buttons "min" or "max"
(see chapter 6.5.2.1 - "Entering set values in the manual mode").
Button "Set values: view/edit" (3)
This button is used to call up the various parameters that can be edited.
Actual values of the current process (4)
This area shows the current process data. The fields can be configured as
desired:
• Select the button of the field that is to be adapted. A dialog box opens:
