Freeze-dryer Gamma 1-16 LSCplus
Freeze-dryer Gamma 2-16 LSCplus
3 Safety
30 / 126
Version 04/2013, Rev. 2.10 of 09/03/2020
• sb-dc
Translation of the original operating manual
3.7.4
Hazards caused by solvents in the products
DANGER
Explosion hazard caused by solvents in the products
When freeze-drying products containing solvents, gas mixtures may form.
These gas mixtures may be ignited on certain components of the freeze-
dryer.
There is an explosion hazard.
• Solvents that are not included in the table in chapter 1.2 - "Intended
use", or the listed solvents in a concentration higher than 10% by
volume, must not be used!
• Refer to the safety data sheets of the products that are used!
3.7.5
Hazards caused by acids in the products
DANGER
Risk of injury caused by acids in the products
Products containing acids may damage the material of the components of
the freeze-dryer and affect the mechanical strength.
This may lead to severe injuries.
Freeze-drying of products containing acids is only permissible if special
protective measures and equipment-related precautions are taken!
Consultation of Martin Christ Gefriertrocknungsanlagen GmbH is
absolutely mandatory in order to define the measures that need to be
taken!
• Refer to the safety data sheets of the products that are used!
3.7.6
Hazards caused by contaminated condensate (defrosting water)
WARNING
Risk of poisoning/infection caused by contaminated condensate
(defrosting water)
The condensate may contain harmful substances originating from the
product.
Contact with the condensate may cause severe damage to health.
• Ensure the environmentally sound disposal of the condensate in
compliance with the local rules and regulations!
• Wear suitable protective clothes, gloves, and respiratory protection
when performing any work on the drain system (especially when
cleaning the valves and replacing the seals)!
3.7.7
Hazards caused by hot surfaces
WARNING
Risk of burns on hot surfaces
After a drying process, the surfaces inside the chamber may still be hot.
There is a risk of burns when touching the surfaces.
• Wear suitable protective clothes and gloves!
• Do not touch the surfaces on purpose!
