SVX8016 IP PBX System User Guide
陈泽科技有限公司
- 61 -
www.stephen-tele.com
A prompt tone will be heard indicating a new call is coming while you are talking. You can press the HOLD key to switch to
the new call. After that you can press the HOLD key again to switch between the two calls.
Call waiting function requires supporting at both the server side and the phone side. To activate the call waiting function in
the service side, you need:
Go to extension manage page, tick the “call waiting”,
Set the call limit to a value bigger than 1.
4.2.3.
Call Transferring
You can transfer an incoming call to another number during conversation.
During conversation, dial “#”, then a voice prompt can be heard telling you to dial the number you want to transfer to.
Dial the number you want to transfer to.
When the number starts ringing, your extension will get a busy tone. Hang up to finish call transferring.
NOTE:
Call Pickup function is temporarily not supported by the FXS extensions of current version of SVX8016.
4.2.4.
Call Forwarding
Three kinds of call forwarding supported in SVX8016:
Call Forwarding Busy
Incoming calls will be automatically forwarded to another number when your extension is busy.
Activate call forwarding busy:
Pick up your IP phone’s handset.
Listen for the dial tone.
Dial “900074X” follow by “#”, where X represents the number you want the call to be forwarded to, then a voice
prompt can be heard telling you the successful activation of the call forwarding busy function.
Deactivate call forwarding busy:
Pick up your IP phone’s handset.
Listen for the dial tone.
Dial “900075” follow by “#”, then a voice prompt can be heard telling you the successful deactivation of the call
forwarding busy function.
NOTE:
In order to use Call Forwarding Busy function:
The number which want enable the call forwarding busy function cannot activate the “follow me” function and the “do
not disturb” function.
The call limit of this number must be set to 1 and the call waiting function must be deactivated.