SVX8016 IP PBX System User Guide
陈泽科技有限公司
- 55 -
www.stephen-tele.com
Realm for digest authentication:
Sets the realm of the server. The calls are addressed like email, in that the format is
user@domain. This variable is how we set the domain part. This could be your host name or a domain name. If we enter
nothing, it will work, and will set our realm to "itspbx", but we really should set this to our domain name.
Pedantic:
nable checking of tags in headers, international character conversions in URIs and multiline formatted headers
for strict SIP compatibility (defaults to "no").
TOS for Signaling packets:
Controls what TOS SIP call signaling packets are set to.
TOS for RTP audio packets:
Controls what TOS RTP audio packets are set to.
Default Incoming/Outgoing Registration Time (sec):
This is the default length in seconds that we set for
Incoming/Outgoing Registration. The default is 120, or 2 minutes.
Max Incoming Registration Time (sec):
This option defines the maximum length in second for incoming/outgoing
registration.
RTP Timeout (sec):
Terminate call if more than the setting seconds of no RTP or RTCP activity on the audio channel
when we're not on hold. This is to be able to hang up a call in the case of a phone disappearing from the net, like a power
loss or grandma tripping over a cable.
RTP Hold Timeout (sec):
Terminate call if more than the setting seconds of no RTP or RTCP activity on the audio channel
when we're on hold (must be greater than RTP timeout).
Extern IP:
Specify the external public IP address if the SVX8016 is behind NAT
Extern Host:
Specify the external domain name if the SVX8016 is behind NAT
Extern Refresh (sec):
Specify the period for the domain refresh. The SVX8016 needs know the actual external IP address
of the domain name if domain name is used in the “External Host.” section, so, the device will periodically sent the refresh
command to get the actual external IP address
Local Network Address:
Define the internal IP addresses which will use the external IP.
T.38 fax (UDPTL) Passthrough:
Enables T.38 fax passthrough on SIP to SIP calls.
Save:
Save the changes.
Cancel:
Discard all changes.
Activate:
Submit the changes to the system to take effect.
3.9.2.
RTP Settings
Click “General” menu, and “RTP settings” submenu, the “RTP settings” page will appear.
