SVX8016 IP PBX System User Guide
陈泽科技有限公司
- 60 -
www.stephen-tele.com
1.
Connect a PSTN line to one of the FXO port, setup a PSTN Trunk for the corresponding FXO port,
2.
Add a calling rule to dial plan. Make this calling rule to place call through the trunk configured in last step,
3.
Change the dial plan of the number which you want use to make out-bound call to the dial plan modified in last
step.
4.
User can start making out-bound PSTN call now.
Pick up your extension’s handset,
Listen for the dial tone,
Dial the outbound prefix of the calling rule,
Dial the PSTN number followed by “#”.
4.1.3.
Making outgoing VoIP calls via VoIP Trunk
In order to be able to make an outgoing PSTN call, user needs:
1.
Setup a VoIP trunk,
2.
Add a calling rule to dial plan. Make this calling rule to place call through the trunk configured in last step,
3.
Change the dial plan of the number which you want use to make out-bound call to the dial plan modified in last
step.
4.
User can star making out-bound via VoIP trunk call now.
Pick up your extension’s handset,
Listen for the dial tone,
Dial the outbound prefix of the calling rule,
Dial the PSTN number followed by “#”.
4.2.
Receiving calls
When receiving calls, either from PSTN or VoIP, your phone will ring. Just lift the handset to accept the call.
4.2.1.
Call Pickup
You can accept an incoming call that is ringing at another extension which belongs to the same pickup group as your
extension.
NOTE:
Call Pickup function is temporarily not supported by the FXS extensions of current version of SVX8016.
Pick up your extension’s handset.
Listen for the dial tone.
Dial “*5” follow by “#”, where X represents the ringing extension number.
4.2.2.
Call Waiting