SVX8016 IP PBX System User Guide
陈泽科技有限公司
- 22 -
www.stephen-tele.com
Device
:
Select a FXS port to configure.
Extension:
The extension number that will be associated with this analog port.
Display Name:
A description name for memorization.
Password:
The password of this extension.
Advanced:
Expand the page to display the advanced feature settings. Click again to return to the basic setting.
Tone zone:
Select from the drag down list to define the tone standard of this
FXS port.
Options:
Click to enable the optional functions for the number.
Call Waiting:
You will hear some signal tone when you are already on the line and someone else calls in. Notice:
To use call waiting feature, the call limit must be greater than 1.
Voice mail:
Enable the voice mail feature for this extension.
Caution:
You must plug in a CF card in order to use the voice mail functionality.
Is Agent:
Set the number as a potential call queue member (agent). Only potential call queue members can join a
call queue, and only members in a call queue can call
*980#
to login to the queue in order to start answer calls
from the queue.
Has SIP
:
Tick to enable the device to register a VoIP extension using this FXS extension’s number. When this VoIP extension
is online, the call send to this number will goes to VoIP extension first, and then transfer to this FXS extension if the VoIP
extension is busy or no
answer.
Show Incoming Call ID:
Tick to show the incoming call’s call ID.
Follow me:
This feature allows you to receive calls at multiple numbers you designate. If you do not pick up at first
location the system will sequentially ring the second and then the third number that you specify. You can
designate numbers in the number list section.
Number list:
Specify the numbers that the follow me feature used. Notice that you can add no more than 3 numbers
is the number list.
Timeout (sec):
Specifies a maximum time, in seconds, that the follow me function will wait for someone to pickup the
phone in one destination before it transfer the call to next one. Range from 10 to 45 seconds.
Save:
Save the changes.