Chevrolet 2010 Tahoe Police Owner'S Manual Download | Manualshive

Page: 350 / 615

background image

Black plate (129,1)

Chevrolet Tahoe/Suburban Owner Manual - 2010

Parental Control

The RSE system may have a Parental Control feature,
depending on which radio the vehicle has. To enable
Parental Control, press and hold the radio power button
for more than two seconds to stop all system features
such as: radio, video screen, RSA, DVD and/or CD.
While Parental Control is on, a padlock icon displays.

The radio can be turned back on with a single press of
the power button, but the RSE system will remain under
Parental Control.

To turn Parental Control off, press and hold the radio
power button for more than two seconds. The RSE
returns from where it was previously left and the
padlock icon disappears from the radio display.

Parental Control can also be turned off by inserting or
ejecting any disc, pressing the play icon on the radio
DVD display menu, or changing an ignition position.

Headphones

The RSE includes two 2-channel wireless headphones
that are dedicated to this system. Channel 1 is
dedicated to the DVD player, while Channel 2 is
dedicated to RSA selections. These headphones are
used to listen to media such as CDs, DVDs, MP3s,
DVDAs, radio, any auxiliary source connected to A/V
jacks, or the auxiliary input jack, if the vehicle has this
feature. The wireless headphones have an On/Off
button, channel 1/2 switch, and a volume control.

If the vehicle has a third row video screen display, it
may have two additional headphones.

Push the power button to turn on the headphones. An
indicator light located on the headphones comes on.
If the light comes on but there is intermittent sound and/
or static on the headphones, or if the indicator light
does not come on, the batteries might need to be
replaced. See

“

Battery Replacement

”

later in this

section for more information. Switch the headphones to
Off when not in use.

4-129

«
...
348
349
350
351
352
...
»

Summary of Contents for 2010 Tahoe Police








































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Tahoe Police

Brand: IAG Pages: 3

Brand: iDataLink Pages: 99

Brand: Metra Electronics Pages: 12

Brand: Halfords Pages: 4

Brand: EUFAB Pages: 12

JEEP GL ADIATOR JT TOPPER ROOF RACK

Brand: JCROffroad Pages: 7

IVH-9000-2R440Q

Brand: Vecow Pages: 110

Brand: Magneti Marelli Pages: 2

Brand: GReddy Pages: 12

Brand: Arrista Pages: 2

Brand: Sintrones Pages: 55

Brand: Tactik Pages: 4

Brand: banks Pages: 76

Brand: Setma Pages: 13

Brand: APS Pages: 4

Brand: Scosche Pages: 32

Brand: Front Runner Pages: 7

Brand: EZ-ON Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands