Chevrolet 2010 Tahoe Police Owner'S Manual Download | Manualshive

Page: 187 / 615

background image

Black plate (46,1)

Chevrolet Tahoe/Suburban Owner Manual - 2010

4. Release the parking brake prior to moving the

vehicle.

Notice:

Shifting the transmission into gear before

the Four-Wheel Drive Low indicator light has
stopped flashing could damage the transfer case.
To help avoid damaging the vehicle, always wait for
the Four-Wheel Drive Low indicator light to stop
flashing before shifting the transmission into gear.

5. Start the engine and shift the transmission to the

desired position.

Excessively shifting the transfer case into or out of the
different modes may cause the transfer case to enter
the shift protection mode. This will protect the transfer
case from possible damage and will only allow the
transfer case to respond to one shift per 10 seconds.
The transfer case may stay in this mode for up to
three minutes.

Four-Wheel Drive (Single Speed
Automatic Transfer Case)

If the vehicle has four-wheel drive, you can send the
engine's driving power to all four wheels for extra
traction. Read the following before using four-wheel
drive.

Notice:

Driving on clean, dry pavement in

Four-Wheel Drive High for an extended period of
time may cause premature wear on the vehicle's
powertrain. Do not drive on clean, dry pavement in
Four-Wheel Drive High for extended periods of time.

While driving on clean dry pavement and during tight
turns, you may experience a vibration in the steering
system.

Front Axle

The front axle engages and disengages automatically
when you shift the transfer case. Some delay for the
axle to engage or disengage is normal.

3-46

«
...
185
186
187
188
189
...
»

Summary of Contents for 2010 Tahoe Police








































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Tahoe Police

GRAND CHEROKEE 2023

Brand: Jeep Pages: 108

Brand: K&M Pages: 3

Brand: Jackco Pages: 11

Brand: Carefree Pages: 12

Brand: Mercedes-Benz Pages: 54

Brand: SuperATV Pages: 7

Brand: P-Invent Pages: 4

Brand: Ecco Pages: 9

Brand: Hyundai Pages: 19

Brand: Gator Pages: 8

Brand: benbat Pages: 14

Brand: SPL Pages: 5

Brand: Pacbrake Pages: 6

Brand: SNIPER Pages: 2

Brand: Power Acoustik Pages: 4

Brand: Maserati Pages: 302

Brand: Thule Pages: 8

Brand: SAFARI Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands