Chevrolet 2010 Tahoe Police, Owner'S Manual

Page: 345 / 615

Black plate (124,1)
Chevrolet Tahoe/Suburban Owner Manual - 2010
Using the Call Command
1. Press and hold
b g
for two seconds. The system
responds with “ Ready ” followed by a tone.
2. Say “ Call ” . The system responds with “ Call using
<phone name>. Please say the name tag ” followed
by a tone.
3. Say the name tag of the person to call.
. If the system clearly recognizes the name tag it
responds with
“ OK, calling, <name tag> ” and
dials the number.
. If the system is unsure it recognizes the right
name tag, it confirms the name tag followed by
a tone. If the name tag is correct, say
“ Yes ” .
The system responds with “ OK, calling, <name
tag> ” and dials the number. If the name tag is
not correct, say “ No ” . The system will ask for
the name tag to be re ‐ entered.
Once connected, the person called will be heard
through the audio speakers.
Using the Re ‐ dial Command
1. Press and hold
b g
for two seconds. The system
responds with “ Ready ” followed by a tone.
2. After the tone, say “ Re ‐ dial ” . The system responds
with “ Re ‐ dial using <phone name> ” and dials the
last number called from the connected Bluetooth
phone.
Once connected, the person called will be heard
through the audio speakers.
Receiving a Call
When an incoming call is received, the audio system
mutes and a ring tone is heard in the vehicle.
.
Press
b g
and begin speaking to answer the call.
. Press
c x
to ignore a call.
4-124