Chevrolet 2010 Tahoe Police Owner'S Manual Download | Manualshive

Page: 240 / 615

background image

Black plate (19,1)

Chevrolet Tahoe/Suburban Owner Manual - 2010

6

(Floor):

Air is directed to the floor outlets, with some

of the air directed to the windshield, side window, and
second row floor outlets. In this mode, the system
automatically selects outside air. Recirculation cannot
be selected when in Floor Mode.

-

(Defog):

The defog mode is used to clear the

windows of fog or moisture. Air is directed to the
windshield, floor outlets, and side window vents. In this
mode, the system turns off recirculation and runs the air
conditioning compressor unless the outside temperature
is close to freezing. The recirculation mode cannot be
selected while in the defog mode.

0

(Defrost):

The defrost mode is used to remove fog

or frost from the windshield more quickly. Air is directed
to the windshield and side window vents, with some
directed to the floor vents. In this mode, the system
automatically forces outside air into the vehicle. The
recirculation mode cannot be selected while in the
defrost mode. The air conditioning compressor runs
automatically in this setting, unless the outside
temperature is close to freezing.

Do not drive the vehicle until all the windows are clear.

#

(Air Conditioning):

Press this button to turn the air

conditioning system on or off. An indicator light comes
on to show that the air conditioning is on. The air
conditioning can be selected in any mode as long as
the fan switch is on.

On hot days, open the windows to let hot inside air
escape; then close them. This helps to reduce the time
it takes for the vehicle to cool down. It also helps the
system to operate more efficiently.

The air conditioning system removes moisture from the
air, so a small amount of water might drip under the
vehicle while idling or after turning off the engine. This
is normal.

h

(Recirculation):

Press this button to turn the

recirculation mode on or off. An indicator light comes on
to show that recirculation is on.

This mode recirculates and helps to quickly cool the air
inside the vehicle. It can be used to help prevent
outside air and odors from entering the vehicle.

4-19

«
...
238
239
240
241
242
...
»

Summary of Contents for 2010 Tahoe Police








































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Tahoe Police

Brand: GMC Pages: 20

Brand: Warrior Products Pages: 4

Brand: Lincoln Pages: 424

Brand: Volkswagen Pages: 26

Brand: Mazda Pages: 720

Brand: Yakima Pages: 21

PRIME DESIGN VRR-NV200

Brand: Safe Fleet Pages: 12

Brand: Whispbar Pages: 15

2010 MX-5 Miata

Brand: Mazda Pages: 8

RAV-4 2015 Series

Brand: Toyota Pages: 50

Brand: OHIOSTEEL Pages: 2

Easy Air Auto Screen

Brand: Wagan Pages: 8

Brand: Ford Pages: 40

Brand: Fabbri Pages: 32

Brand: Whelen Engineering Company Pages: 2

Brand: PEUGEOT Pages: 232

Brand: Quadratec Pages: 8

Brand: Metra Electronics Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands