13
Automatic reversal of polarity for a measurement at 200 mA.
Before the measurement: to display the measurements already recorded.
During or after the measurement: to record it.
The direction of the arrow indicates whether you can make a reading (arrow pointing out) or a recording (arrow
pointing in).
The percentage indicates the quantity of memory already used.
6 %
TEST
If you selected the pulse mode, press the TEST button once and the measurement stops automatically when it is over.
If you selected the permanent mode, press the TEST button once to start the measurement and a second time to
stop it, or else press the record key
5 %
directly.
Measurement current.
R =
CONTINUITY
02
/
10
/
2009 10
:
47
2
.
00
Ω
- - .- Hz
0 . 8
3
Ω
I 2 0 7 . 4 m A
R + 0 . 5 9
Ω
R - 1 . 0 8
Ω
1 %
..\..
1 %
Measurement with a positive cur-
rent (R+).
Case where the measurement is
below the alarm threshold.
3.2.3. READInG of tHE REsUlt
In the case of a 200 mA current:
To activate the alarm.
Measurement at positive polarity only.
Measurement at negative polarity only.
Value of the alarm threshold.
Measurement with reversal of polarity.
Once the parameters have been defined, you can start the measurement.
Measurement with a negative cur-
rent (R-).
Compensation for the resistance of
the measurement leads is activated.
Permanent mode.
002.00
k
Ω
Ω
To deactivate the alarm.
To set the alarm threshold (see §3.15). The default threshold is 2
W
.
Measurement result:
(R+) + (R-)
2
Use the key to see the rest of the
measurement display.
Summary of Contents for C.A 6116
Page 1: ...C A6116 Installation TESTER E N G L I S H User s manual...
Page 95: ...95...
