38
(3)
Settings:
Set conversion for top or bottom layer. When bottom, mirroring is
normally checked;
(4)
Convert:
Convert CSV file to work file;
13.2.1. Feeders
After conversion, the feeders tab is displayed, as shown below. The converted file is
typically saved next since it can be edited later in the
“Run / Edit” menu. The height
listing of 50 seems to be an error as it is set to 0.5 when loaded to run. Useful functions
here are setting the angle orientation of the picked components.
(1)
Rotate 180:
For the selected feeder, the component is rotated 180 degrees;
(2)
Rotate 90:
For the selected feeder, rotated 90 degrees.
(3)
Save:
Save converted work file.
Figure
13.14.
Window after “File / Convert File / Open / Convert / Feeder tab”.
13.2.2. Components
The components window is show below. The new functions are
