11
Figure 10.2.
Window after “Run / Edit / Component tab”, listing components.
10.1.1.
Component
The screen shown above is used for managing individual components in PCB. It
shows a list of all components in the selected work file. The rows are color coded:
Gray
skip component;
White
vacuum checks disabled and vision centering disabled;
Orange vacuum checks enabled and vision centering disabled;
Green
vacuum checks disabled and vision centering enabled;
Purple vacuum checks enabled and vision centering enabled;
(1)
Add:
Add a component to the end of the list;
(2)
Insert:
Insert a new component before the currently selected row;
(3)
Delete:
Delete the selected component;
(4)
Edit:
Edits the selected component, see below for details;
(5)
Save:
If you edit a component in the list, the save button will flash. This indicates
information has not yet been saved; click to save and stop flashing;
10.1.1.1. Edit
The component edit screen is shown below.
