15
Operation
Operation
POWER
CYCLE
3 MIN
6 MIN
1 MIN
2 MIN
WASH CYCLE
RINSE PRESSURE
WASH TEMPERATURE
ON
OFF
1. Make sure the power is on.
2. Make sure the cycle light is out.
The time cycle cannot be changed
if the dishwasher is actively running
a timed cycle.
3. Make sure all doors are closed.
4. Turn the wash cycle selector knob to
either 1, 2, 3, or 6 minute setting.
Open the dishwasher doors to
lock-in the selected time cycle. The
time cycle will run when the doors
are closed for the next automatic
cycle.
NOTE:
The time cycle will not change if the
selector switch is turned when the doors
are open.
Refer to the information below for the
cycle time breakdowns.
NOTE:
The 1 and 2 minute time cycles are
designated for dishes and the 3 and 6
minute cycles are designated for
pots and pans.
Setting the Wash Cycle Selector Switch -
The selector switch provides 4 time options, 2 for dishes and 2 for pots and
pans. To select a time cycle:
1 Minute Wash Cycle
Wash =
44 seconds
Final Rinse = 10 seconds
Dwell =
14 seconds
Total Cycle = 68 seconds
2 Minute Wash Cycle
Wash =
96 seconds
Final Rinse = 13 seconds
Dwell =
11 seconds
Total Cycle = 120 seconds
3 Minute Wash Cycle
Wash =
156 seconds
Final Rinse = 13 seconds
Dwell =
11 seconds
Total Cycle = 180 seconds
6 Minute Wash Cycle
Wash =
96 seconds
Final Rinse = 13 seconds
Dwell =
11 seconds
Total Cycle = 360 seconds
Summary of Contents for D-H1TCM5
