2
Installation
Electrical Connections
Electrical knockout
lower rear corner
ATTENTION
A qualified electrician must connect the main incoming power to the dishwasher in accordance with all
local codes and regulations or in the absence of local codes in accordance with the National Electrical
Code.
WARNING
:
Electrocution or serious injury may result when working on an
energized circuit.
Disconnect power at the main breaker or service disconnect
switch before working on the circuit.
Lock-out and tag the breaker to indicate that work is being
performed on the circuit.
1. A knockout is provided at the lower right rear
corner (machine viewed from the front) for the
electrical service connection. A fused
disconnect switch or circuit breaker (supplied
by others) is required to protect the power
supply circuit.
2. Remove two screws on the control
panel support and swing the panel
forward to gain access to the main
terminal block.
Summary of Contents for D-H1TCM5
