3 SCPI
3.3 Instrument-specific Commands
95
name path: if the file name is a relative file name and does not include a path, the
file path is loaded under the corresponding folder of D:\EnrData;
If the file name is an absolute file name and contains an absolute path, the
corresponding file is loaded from this path and the path is separated by a right
slash.
Example:
:MMEM:LOAD:LOSS AFTer,”lossTable01.los”
Key path:
Front panel
【
File
】
—>[Load]—>[Before DUT Table/After DUT Table]
[ Load Limit Line ]
:MMEMory:LOAD:LIMit
Function description:
This command is used to load the specified limit line from the specified file.
Setting format:
:MMEMory:LOAD:LIMit LLINe1|LLINe2|LLINe3|LLINe4,<file_name>
Parameter description:
LLINe1
：
LimitLine1
LLINe2
：
LimitLine2
LLINe3
：
LimitLine3
LLINe4
：
LimitLine4
<file_name> File name, the file extension is .STA.
The file names are put in double quotes. There are two ways to express the file
name path: if the file name is a relative file name and does not include a path,
the file path is loaded under the corresponding folder of D:\EnrData;
If the file name is an absolute file name and contains an absolute path, the
corresponding file is loaded from this path and the path is separated by a right
slash.
Example:
:MMEM:LOAD:LIM LLINe1,”D:\EnrData\limitLine01.lim”
Key path:
Front panel
【
File
】
—>[Load]—>[Limit Line 1/2/3/4]
3.3.14.2 Save
[ Save ENR Table ]
:MMEMory:STORe:ENR
Function description:
This command is used to save the ENR table to the specified file.
Setting format:
:MMEMory:STORe:ENR CALibration|MEASurement,<file_name>
Parameter description:
CALibration: Select calibration ENR table
MEASurement: Select measurement ENR table
<file_name> File name, the file extension is .ENR.
The file names are put in double quotes. There are two ways to express the file
name path: if the file name is a relative file name and does not include a path,
the file path is loaded under the corresponding folder of D:\EnrData;
If the file name is an absolute file name and contains an absolute path, the
corresponding file is loaded from this path and the path is separated by a right
slash.
Example:
:MMEM:STOR:ENR MEAS,”D:\EnrData\346C.enr”
Key path:
Front panel
【
File
】
—>[Save]—>[Measurement ENR/Calibration ENR]
