Appendixes
Appendix B Quick Search Table of Error Messages
127
103
YTO CHK
YTO ring locked for checking
104
OVERSTEP
The number of error voltage zero adjustments exceeds 15
105
CORS LOW
The coarse DAC value is out of range 0 to 255, less than 0
106
CORS UPR
The coarse DAC value is out of range 0 to 255, greater than
255
107
CORS LOW
In coarse tuning process, coarse DAC value of less than 0 is
caused by the fine DAC value of less than 65
108
CORS UPR
In coarse tuning process, coarse DAC value of greater than
255 is caused by the fine DAC value of greater than 255
109
CORS UPR
In fine tuning process, coarse DAC value of greater than 255
is caused by the fine DAC value of greater than 255
110
CORS UPR
In fine tuning process, coarse DAC value of greater than 255
(out of range 0 to 255) is caused by the fine DAC value of
greater than 191
111
CORS LOW
In fine tuning process, coarse DAC value of greater than 255
(out of range 0 to 255) is caused by the fine DAC value of
less than 0
112
CORS LOW
In fine tuning process, coarse DAC value of greater than 255
(out of range 65 to 255) is caused by the fine DAC value of
less than 0
113
SAMP LOW
Sampling ring lower-end losing lock
114
FRACNUPR
Fractional ring upper-end losing lock
115
LO1 FAIL
Local oscillator 1 adjustment failed
116
LO2 FAIL
Local oscillator 2 adjustment failed
201
LOAD CAL
Failed to call the file storing calibration data
202
DSP DATA
Failed to write calibration data to DSP
203
SAVE CAL
Failed to write or create the file storing calibration data
210
GETCALTR
Failed to get calibration sweep trace during calibration
220
CALFLTNS
Calibration data overrun when calibrating in-band flatness
221
40MFLTNS
40 MHz in-band flatness calibration error
222
13MFLTNS
13MHz in-band flatness calibration error
223
3M FLTNS
3MHz in-band flatness calibration error
224
.1MFLTNS
100kHz in-band flatness calibration error
225
200MFLTN
200MHz in-band flatness calibration error
226
100MFLTN
100MHz in-band flatness calibration error
227
50MFLTNS
50MHz in-band flatness calibration error
230
200MEror
Error in 200 MHz bandwidth conversion error calibration
231
100MEror
Error in 100MHz bandwidth conversion error calibration
232
50MError
Error in 50MHz bandwidth conversion error calibration
233
40MError
Error in 40MHz bandwidth conversion error calibration
234
20MError
Error in 20MHz bandwidth conversion error calibration
235
10MError
Error in 10MHz bandwidth conversion error calibration
