1-5
Empennage
7.
The empennage is of conventional configuration and all metal construction with the
following characteristics:
a.
an elevator trim tab located on the right hand elevator;
b.
rudder trim which adjusts the neutral position of the rudder;
c.
vortex generators applied to the lower trailing edge of the horizontal stabilizer to
enhance low speed pitch control;
d.
vortex generators applied to the trailing edge of the vertical stabilizer to enhance
low speed directional control; and
e.
horn style balance weights on both the rudder and elevator.
Figure 1-7 Tail Vortex Generators
Summary of Contents for 182
Page 2: ......
Page 57: ...1 39 Figure 1 47 Electrical Schematic ...
Page 76: ...1 58 This page intentionally left blank ...
Page 124: ...2 48 This page intentionally left blank ...