V3.0
Interface:
The interface that a filter rule applies.
Schedule:
Can choose to use rule by
“Time Policy”.
Click
“Save”
button to save your set function. Then click “Reboot” button to activate your changes.
5.5.3
MAC Filter
Allows creating MAC filter rules to allow or deny unicast or multicast packets from limited number
of MAC addresses. Important and must note. That MAC filter rules have precedence over IP Filter
rules.
Mode:
Administrator can select Deny or Allow.
Deny:
The MAC Filter List will be
denied
to access (LAN to WAN). Others will be allowed.
Allow:
The MAC Filter List will be
allowed
to access (LAN to WAN). Others will be denied.
Comment:
Enter the
description of MAC filter rule.
MAC Address:
Enter MAC address (e.g. aa:bb:cc:00:00:0a) and click “
Add
” button, then the
MAC address should display in the MAC Filter List.
Policy:
Administrator can select to use rule by
“Time Policy”.
Click
“Save”
button to save your set function. Then click “Reboot” button to activate your changes.
All packets are allowed by default. Deny rules could be added to the filter list to filter
out unwanted packets and leave remaining allowed.
