V3.0
PPTP:
The Point-to-Point Tunneling Protocol (PPTP) mode enables the implementation of
secure multi-protocol Virtual Private Networks (VPNs) through public networks.
User Name:
Enter account for PPTP.
Password:
Enter user name account used password for PPTP.
PPTP Server IP:
Enter remote IP address of PPTP Server.
WAN IP:
The IP address of the WAN port.
Netmask:
The Subnet mask of the WAN port.
MTU:
By default, it’s
1460
bytes. MTU stands for Maximum Transmission Unit. Consult
with WISP for a correct MTU setting.
MPPE40/128:
Microsoft Point-to-Point Encryption (MPPE) encrypts data in Point-to-Point
Protocol (PPP)-based dial-up connections or Point-to-Point Tunneling Protocol (PPTP)
virtual private network (VPN) connections.
128
-
bit
key (strong) and
40
-
bit
key (standard)
MPPE encryption schemes are supported. MPPE provides data security for the PPTP
connection that is between the VPN client and the VPN server.
Reconnect Mode:
Administrator can select three function for Always On / On Demand /
Manual.
Always on
– A connection to Internet is always maintained.
On Demand
– A connection to Internet is made as needed.
When
Time
Server
is enabled at the “On Demand” mode, the “Reconnect Mode” will
turn out “Always on”.
