V3.0
5.2
Configure LAN Setup
Here are the instructions for how to setup the local IP Address and Netmask. Please click on
System ->
LAN
and follow the below setting.
IP Setup:
The administrator can manually setup the LAN IP address.
IP Address :
The IP address of the LAN port; default IP address is 192.168.2.254
IP Netmask :
The Subnet mask of the LAN port; default Netmask is 255.255.255.0
802.1d Spanning Tree :
The spanning tree network protocol provides a loop free topology for a
bridged LAN between LAN interface and 8 WDS interfaces from wds0 to wds7. The Spanning Tree
Protocol, which is also referred to as STP, is defined in the IEEE Standard 802.1d
Click
“Save”
button to save your set function. Then click “Reboot” button to activate your changes.
5.3
Configure DHCP Server
The DHCP Service function in the Client Bridge device can select a separate IP Address range within the
same network segment of the source AP, and allocate those IP Addresses to connecting clients.
