V3.0
3.1.3
Radio 0 Access Point Setup
Administrator can Enable or Disable radio 0 (5G) Wi-Fi. If radio 0 (5G) are enabled, administrators
can set the SSID and security for the 5G access point.
Access Point:
Administrator can
Enable or Disable the radio 0 (5G).
ESSID:
Administrator can set Wi-Fi SSID name
SSID Visibility:
Administrator can select
Enable or Disable the Visibility.
Client Isolation:
Enable or Disable the client isolation function.
Connection Limit:
Administrator can select
Enable or Disable WiFi connection Limit.
User Limit:
If select enable of the connection Limit function, administrator can set users
connection limit.(
Recommended limit 60 Wi-Fi Users)
Security Type:
Select the desired security type from the drop-down list; the options are Open
System, WPA-PSK/WPA2-PSK and WPA/WPA2-Enterprise.
Open System:
Data is not unencrypted during transmission when this option is selected.
WPA-PSK/WPA2-PSK Personal:
WPA/WPA2 is short for W-Fi Protected Access-Pre-Shared
Key. WPA/WPA2 uses the same encryption way with WPA, and the only difference between
them is that WPA/WPA2 recreates a simple shared key, instead of using the user’s
certification.
