V3.0
VLAN Mode
：
Administrator can Enable or disable the VLAN function.
IP setup
：
Administrator can set the VLAN IP address and NetMask or disable IP.
802.1d Spanning Tree
：
The spanning tree network protocol provides a loop free topology for a
bridged LAN between LAN interface and 8 WDS interfaces from wds0 to wds7. The Spanning
Tree Protocol, which is also referred to as STP, is defined in the IEEE Standard 802.1d.
ETH0
：
Administrator select Enable/disable the Ethernet port.
VLAN Tag
：
Administrator can set Tag ID for the Ethernet port.
Set Gateway / DNS address functions.
Gateway:
The default Gateway IP Address is 192.168.2.1, Please check your Gateway IP and
change.
DNS
: Check either “
No Default DNS Server
” or “
Specify DNS Server IP
” button as desired to
set up the system DNS.
Primary
: The IP address of the primary DNS server.
Secondary
: The IP address of the secondary DNS server.
Click
“Save”
button to save your set function. Then click “Reboot” button to activate your changes.
There must always be at least one VLAN enabled. If the administrator disables all the VLANs, he/she
will not be able to login to the manager page. The administrator must then reset to default.
