V3.0
5.4.5
Repeater AP Setup
Administrators can configure ESSID, SSID broadcasting, Maximum number of client associations.
Access Point:
Administrator can Enable or Disable the Repeater AP function.
ESSID:
Enter the Repeater AP of ESSID name.
SSID Visibility:
The default it’s Enable
.
When select Disable the SSID will not is discovered.
Client Isolation:
This function is Disabled by default. All clients will be isolated from each other,
which mean they can’t reach each other.
Connection Limit:
This function is Disabled by default. If select Enable, Administrator can limit
Wi-Fi users the Quantity.
Authentication:
Select the desired security type from the drop-down list; the options are
WPA-PSK, WPA2-PSK, WPA/WPA2-Enterprise and WEP 802.1X.
Open System:
Data are not unencrypted during transmission when this option is selected.
WPA/WPA2 Personal:
WPA/WPA2 is short for W-Fi Protected Access-Pre-Shared Key.
WPA/WPA2 uses the same encryption way with WPA, and the only difference between
them is that WPA/WPA2 recreates a simple shared key, instead of using the user’s
certification.
1.
If want to use Repeater AP function then Clinet Bridge must determine connection
to Access Point then Repeater AP can operate normally.
2.
The default is enabling of Repeater AP. If want to used pure Client Bridge will can
disable it.
