Cerio OW-200 A1 User Manual Download

Page: 59 / 120

V3.0

Client Bridge Mode

When Client Bridge is chosen, the system can be configured as a Client Bridge and support Repeater AP
function. This can setup VLAN and DHCP server in the system menu.

This section provides detailed explanation for users to configure in the Client Bridge Mode and Repeater AP
function with help of illustrations.

4.1

Configure LAN Setup

Here are the instructions for how to setup the local IP Address and Netmask. Please click on

System ->

LAN

and follow the below setting.



Mode:

Administrator can select the IP used Static or Dynamic IP address.



Static IP:



IP address:

The IP address is 192.168.2.254



Netmask:

The

default Netmask is 255.255.255.0



Gateway:

The default Gateway IP Address is 192.168.2.1, Please check your Gateway IP and

change.

Summary of Contents for OW-200 A1

























































































































Search results

Summary of Contents for OW-200 A1

Reviews:

Related manuals for OW-200 A1

Brands by name

Popular brands

Cerio OW-200 A1, User Manual

Search results

Summary of Contents for OW-200 A1

Reviews:

Related manuals for OW-200 A1

Brands by name

Popular brands