V3.0
＃
Network Setup
Network button
Administrator can click button to set VLAN network functions.
VLAN Mode
：
Administrator can select Enable or disable for the VLAN Network.
IP Mode
：
Administrator can select enable or disable function for VLAN IP.
IP Address/ NetMask
：
Administrator can set IP address and netmask for the VLAN.
Management
Access Point 0
：
Administrator can Enable or Disable 5G Radio.
802.1d Spanning Tree :
The spanning tree network protocol provides a loop free topology for
a bridged LAN between LAN interface and 8 WDS interfaces from wds0 to wds7. The Spanning
Tree Protocol, which is also referred to as STP, is defined in the IEEE Standard 802.1d
Control Port
：
Administrator can select one of the VLAN as managed AP.
IAPP
：
Administrator can select radio 5G for IAPP roaming
.
(the IAPP condition must use
WPA2-PSK Wi-Fi security and AES algorithm)
VLAN Tag Setup:
Set the VLAN used tags.
At least one VLAN will always be enabled by default
