69
Technical instructions
Cm
-SOL
Factory settings
Table 2
02:00-03:00
mon
8.x.5. Skip legionella time
In this menu Skip legionella time function can be enabled or disabled.
In case function is enabled and in time interval between two legionella
protection activation, temperature and time of the protection function is
reached, next interval for protection is skipped and next time interval is
scheduled.
Skip legionella time
OFF
Factory settings
OFF/ON
8.x.6. Disinfection time
Setting the duration of water temperature that must be above set
Protection temp. to have succesfull disinfection.
Disinfection duration
15
Factory settings
min./max.
1 / 1440 min
8.x.7. Recirculation legionella
In this menu DHW recirculation can be enabled/disabled when
Legionella protection function is active to disinfect pipeline (circulation
must be set in the system).
When conventional heating source is started, recirculation pump is also
started and works until disinfection is finished.
NOTE:
recirculation must be set and enabled in the installation menu.
Recirculation leg.
OFF
Factory settings
OFF/ON
8.x.4. Choose source
In this menu conventional heating source for tank disinfection according
the schedule and temperature must be set. Selected heating source
must be able to achieve set temperature in set schedule time (in menu
are displayed only set convencional heating sources).
Facotry settings
Choose source
El. heater
El. heater/Boiler 1/Boiler 2
Installation, legionella
8.x.3.3. Table 2
In this menu 3 time intervals can be set (3 starts (green fields) and 3
stops (3 red fields)) for each day of the week when Legionella protection
will work.
Factory setting: Legionella protection is active one day of the week
(Monday) from 02:00 to 03:00 h.
example: configurated 3 conventional sources
selection
selection
selection
unit.
selection
