63
Technical instructions
Cm
-SOL
8.3.x.4.1.Schedule
In this menu Schedule can be enabled/disabled and set one of two
tables according to which pool pump Pulse start will work.
NOTE:
If Pulse start is on and Schedule is off, pulse start will work all the
the time (24/7) according the work/pause time. In this case, power
supply consumption can be increased (pool pump) and pool cooling can
occur.
Factory settings
Schedule
Table 1
OFF/Table 1/Table 2
8.3.x.4.2.Table 1
In this menu 3 time intervals (3 starts (green fields) and 3 stops (red
fields)) can be set for each day of the week according to pool pump will
work in pulse start.
Factory setting: pulse start is active from 08:00 h to 17:00 h every day of
the week. From 17:00 h of the first day to 08:00 h next day pulse start
doesn’t work.
Factory settings
Table 1
08:00-17:00 mon/tue/wed/thu/fri/sat/sun
8.3.x.4.3.Table 2
In this menu 3 time intervals (3 starts (green fields) and 3 stops (red
fields)) can be set for each day of the week according to pool pump will
work in pulse start.
Factory setting: pulse start is active from 08:00 h to 17:00 h every day of
the week. From 17:00 h of the first day to 08:00 h next day pulse start
doesn’t work.
Installation, tank
Factory settings
Table 2
08:00-17:00 mon/tue/wed/thu/fri/sat/sun
selection
selection
selection
