Installation, system components
8.1. SYSTEM COMPONENTS
8.1. System components
In the menu 8.1. System components you can find the menus connected
with the selection of the existing components in the system and the
configuration of the individual controller outputs.
8.1.1. Collectors
In this menu you can find the menus connected with the selection of the
number of the solar collector fields and the type of the installed solar
collectors.
8.1.1.1. Collector fields
In this menu it is necessary to select the number of the solar collector
fields (the solar collector field is a set of collectors connected in one
system with one solar collector pump).Two solar collector fields are
usually installed as one on the east part and one on the west part of the
roof and each field is separately connected with the tank with its solar
collector pump.
selection
Collector fields
One field
One field / Two fields
8.1.1.2. Field type
In this menu it is necessary to select the type of used collectors in the
solar collector field.
It is always possible to select only one type of collectors, whether one or
two solar collector fields were selected.
The selection of the solar collectors only serves for the graphical display
of the solar collectors on the screen.
Field type
Vacuum tube
Vacuum tube/Flat plate
two fields
Vacuum
tube
collector
flat plate
collector
one field
41
Technical instructions
Cm
-SOL
Factory settings
Factory settings
selection