5.5. Sound volume:
Setting one out of 3 sound volumes by pressing the display or a
complete volume switch off.
5.6. Sound type:
Selecting on out of 10 possible sound types which are heard when
pressing the display.
Sound volume
2
selection
OFF/1...3
Sound type
Type 3
selection
Type 1...Type 10
5.2. Language selection
In this menu it is enabled or disabled to display the initial screen with the
language selection when pressing the main switch. In case you select
„Switched off„ , after pressing the main switch the controller will turn on
with the previous set language and after a certain time of „initial message
time „ the main screen will appear.
NOTE:
It is obligatory after the language selection to switch off the „
Language selection „to enable the controller to start up automatically after
the arrival of electricity. If the „Language selection„ is not switched off, after
the electricity arrival the controller/regulation will wait for someone to
select the desired language in order that the main screen and possible
errors appear.
Language
selection
ON
Factory settings
selection
ON/OFF
5.3. Initial message time
Setting of initial message duration which appear after switching on the
main switch.
Time is running only if the „ Language selection „ is set on „ OFF„ .
5
min./max.
0 / 20
sec
unit.
5.4. Date and time:
Current date and time settings.
NOTE:
If the date and time is not correct, the schedule time will not work
properly. If the clock starts to be late or it resets on 00:00 and the date on
01.01.2000 it is necessary to replace the battery in the controller display
(CR1220) (see chapter battery replacement).
35
Technical instructions
Cm
-SOL
Factory settings
Language
selection
Factory settings
Factory settings
User menu, history
