EN
EN
DIGIWAY Plus
Inward or Outward Door Operator
12
A
B
The Sliding Arm is designed for pull applications, inward opening doors.
The Sliding Arm is designed for pull applications, inward opening doors.
1) Using the dimensions of the motor and the template provided (see inside of the
1) Using the dimensions of the motor and the template provided (see inside of the
box sleeve) locate the fixing positions and cable holes;
box sleeve) locate the fixing positions and cable holes;
2) Using the guide check the motor will fit into the available space to the correct
2) Using the guide check the motor will fit into the available space to the correct
mounting dimensions;
mounting dimensions;
3) Make 6 holes diameter Ø 8mm and insert the 6 rawl plugs provided;
3) Make 6 holes diameter Ø 8mm and insert the 6 rawl plugs provided;
4) Fix the plate to the wall using the screws provided; 5) Fix the motor to the
4) Fix the plate to the wall using the screws provided; 5) Fix the motor to the
mounting plate with the M6 x 14 bolts provided;
mounting plate with the M6 x 14 bolts provided;
6) Attach the sliding arm to the motor shaft and secure with the M6 bolt provided;
6) Attach the sliding arm to the motor shaft and secure with the M6 bolt provided;
7) Slide the sliding block into the guide;
7) Slide the sliding block into the guide;
8) Hold the guide to the door and mark the 4 fixing holes making sure the guide is
8) Hold the guide to the door and mark the 4 fixing holes making sure the guide is
parallel to the Digiway;
parallel to the Digiway;
9) Remove the sliding block and fix the guide to the door by using the 4 special
9) Remove the sliding block and fix the guide to the door by using the 4 special
screws provided;
screws provided;
10) Slide the white strip completely into the guide;
10) Slide the white strip completely into the guide;
11) Slide the sliding block into the guide and insert the two end cups;
11) Slide the sliding block into the guide and insert the two end cups;
12) Check full free movement whilst in free mode.
12) Check full free movement whilst in free mode.
13) Make all the electrical connections;
13) Make all the electrical connections;
14) Apply power;
14) Apply power;
Articulated arm version
Articulated arm version
