EN
EN
DIGIWAY Plus
Inward or Outward Door Operator
11
2] INSTALLATION
2] INSTALLATION
Sliding arm version
Sliding arm version
Important: Check the integrity of the door that is to be automated, verifiying
Important: Check the integrity of the door that is to be automated, verifiying
the operation in both directions is smooth without any friction from the closed
the operation in both directions is smooth without any friction from the closed
to open position and the open to closed position. If this is not the case, make
to open position and the open to closed position. If this is not the case, make
any repairs or improvements necessary to achieve a smooth operation of the
any repairs or improvements necessary to achieve a smooth operation of the
door. Remove any manually operated locking mechanism unless it is to be
door. Remove any manually operated locking mechanism unless it is to be
used with a strike. A door stop is not required to complete the opening cycle.
used with a strike. A door stop is not required to complete the opening cycle.
Warning:
Warning: Any existing closing device should be removed to allow the door to move
Any existing closing device should be removed to allow the door to move
freely. Hydraulic devices MUST be replaced with dummy units as adjusting the device
freely. Hydraulic devices MUST be replaced with dummy units as adjusting the device
will not allow the Digiway to operate correctly.
will not allow the Digiway to operate correctly.
Parameter
Value
(mm)
Description
A
A
240
240
Door hinge – motor axis distance
Door hinge – motor axis distance
B
B
35
35
Backplate – guide distance
Backplate – guide distance
C
C
100
100
Motor axis - guide edge
Motor axis - guide edge
D
D
500
500
Guide width
Guide width
EE
18,5
18,5
Distance hinges - backplate hole
Distance hinges - backplate hole
FF
70,5
70,5
Motor axis - vertical plane distance
Motor axis - vertical plane distance
