CDVI DIGIWAY PLUS, Manual

Page: 35 / 48

EN EN
DIGIWAY Plus
Inward or Outward Door Operator
35
6. Mechanical check 6. Mechanical check
• • Move the side switches in position 0 and check the fluency of the motion both in Move the side switches in position 0 and check the fluency of the motion both in
opening and in closing. opening and in closing.
Part II : Electrical Connections Part II : Electrical Connections
The range of motors for the double door is described in the following table: The range of motors for the double door is described in the following table:
With the motors DWPD, with central profile, the product comes already equipped with With the motors DWPD, with central profile, the product comes already equipped with
synchronization cable. synchronization cable.
It is also possible to use 2 single door units (DWP102x) to automate a double leaf door It is also possible to use 2 single door units (DWP102x) to automate a double leaf door
by the syncronisation of each leaf using the DWPCS serial cable (option). by the syncronisation of each leaf using the DWPCS serial cable (option).
The cable is terminated with 2 special 3-way connectors and must be inserted in the The cable is terminated with 2 special 3-way connectors and must be inserted in the
corresponding slot located under the PCB controller of the Digiway (see below). corresponding slot located under the PCB controller of the Digiway (see below).
Double door total
width
Leaves width
p/n Articulated
Arm
p/n Sliding Arm
p/n Universal
Arm
1600 mm 1600 mm 70 - 80 mm 70 - 80 mm DWPD10216ACD DWPD10216ACD DWPD10216SCD DWPD10216SCD DWPD10216UCD DWPD10216UCD
1700 mm 1700 mm 81 - 85 mm 81 - 85 mm DWPD10217ACD DWPD10217ACD DWPD10217SCD DWPD10217SCD DWPD10217UCD DWPD10217UCD
1800 mm 1800 mm 86 - 90 mm 86 - 90 mm DWPD10218ACD DWPD10218ACD DWPD10218SCD DWPD10218SCD DWPD10218UCD DWPD10218UCD
1900 mm 1900 mm 91 - 95 mm 91 - 95 mm DWPD10219ACD DWPD10219ACD DWPD10219SCD DWPD10219SCD DWPD10219UCD DWPD10219UCD
2000 mm 2000 mm 96 - 100 mm 96 - 100 mm DWPD10220ACD DWPD10220ACD DWPD10220SCD DWPD10220SCD DWPD10220UCD DWPD10220UCD
3 3
Serial cable DWPCS Serial cable DWPCS
1) 1) Connect the motors referring to the electrical diagram of the single door. Connect the motors referring to the electrical diagram of the single door.
WARNING: in the double door mode, with leaves overlapping (rebated), it is very WARNING: in the double door mode, with leaves overlapping (rebated), it is very
important to identify the type of unit important to identify the type of unit
• • MASTER MASTER unit drives the leaf which opens first and closes last unit drives the leaf which opens first and closes last
• • SLAVE SLAVE unit drives the leaf which opens last and closes first unit drives the leaf which opens last and closes first
Master Master
Slave Slave