CDVI DIGIWAY PLUS Manual Download

Page: 21 / 48

DIGIWAY Plus

Inward or Outward Door Operator

Parameter

Description

Option

Default

Num. Doors

Sets the number of Doors

ONE DOOR / TWO DOORS

ONE DOOR

Electrolock

Enables electrolock and specify the type

NO LOCK / STRIKE / MAG-

NET

NO LOCK

Opening Jolt

Enables the opening Jolt: SORT CLOSING PULSE BEFORE

OPENING, useful when using an electric strike to stop

binding.

ENABLE / DISABLE

DISABLE

Push & Open

Opens automatically the door with a short push.

ENABLE / DISABLE

ENABLE

Push & Close

Closes the door with a short push even in pause status.

ENABLE / DISABLE

ENABLE

Wind Stop

Keeps the door closed in presence of wind which pushes the

door. See ADVANCED SETTINGS to set the level of the

closing force used.

ENABLE / DISABLE

DISABLE

Autoreclosing

Enables the automatic reclosing of the door

ENABLE / DISABLE

ENABLE

Radar ‘I’ Mode

INTERNAL radar operating mode. If it’s selected the

option CLOSING the radar is excluded during the closing.

This prevents the door reopening if the arm or door is

detected. (*)

NEVER / CLOSING / ALWAYS

NEVER

Radar ‘E’ Mode

EXTERNAL radar operating mode. If it’s selected the

option CLOSING the radar is excluded during the closing.

This prevents the door reopening if the arm or door is de-

tected. (*)

NEVER / CLOSING / ALWAYS

NEVER

Day / Night

Set the Night / Day mode. In Night mode the External radar

is disabled.

DAY & NIGHT / NIGHT

NIGHT

Disabled Mode

Disabled access mode (see paragraph Disabled Access set-

tings)

ENABLE / DISABLE

DISABLE

Open Command

Optional functions for the open command; Open, Close or

Stop. Once selected the function will operate from the open

button (terminals 15 - 16) and the radio transmitter.

OPEN - OPEN/CLOSE -

OPEN-CLOSE/STOP

OPEN/

Spring Mode

If the door is closed it will remain free and can be pushed/

pulled manually; if opened fully the will close after the preset

pause time.

Note: If the door is partially opened up to 75% the pause

time will be 1 sec and will close after .

ENABLE / DISABLE

DISABLE

2 Doors Overlap

Overlap of the leaves (in case of double doors). The MASTER

leaf starts opening first, the SLAVE starts closing first. If

disabled the doors open simultaneously.

ENABLE / DISABLE

DISABLE

Door Type

Leaf MASTER or leaf SLAVE ( in case of double doors )

MASTER / SLAVE

MASTER

Arm Type

Articulated or sliding arm. This parameter set the VELOCITY

of the door according to the arm type selected.

(see Adjustments)

50% ARTICULATED ARM, 70% SLIDING ARM

SLIDING / ARTICULATED

SLIDING

Fire Signal

Fire signal management. When this option is enabled the

door opertates normally if the fire voltage is present V+/V-.

If the fire power is removed(fire alarm triggered) the door

reacts to the option set in the advanced settings.

ENABLE / DISABLE

DISABLE

Step II allows the set up of all the basic parameters of the operator depending on

the door type that is being automated. The submenu CONFIGURATION consists of 18

parameters. Each parameter can have 2 or more values. For each parameter there is

a preset factory value. If the function FACTORY DEFAULT of the main menu is used, all

the parameters are reset to those values.

See the description of each parameter in the following table:

STEP II: CONFIGURATION

(*) Please Note: the door must fully close before it can be opened again.

Summary of Contents for DIGIWAY PLUS

















































Search results

Summary of Contents for DIGIWAY PLUS

Reviews:

Related manuals for DIGIWAY PLUS

Brands by name

Popular brands

CDVI DIGIWAY PLUS, Manual

Search results

Summary of Contents for DIGIWAY PLUS

Reviews:

Related manuals for DIGIWAY PLUS

Brands by name

Popular brands