UNI Stop/Holder
UNI-TJ50BC Series
UNI-TJ51(BF) Series
Sized Closers
Multi-Sized Closers
Installation Instructions
80-9350-2517-010 (06-09)
Non Handed Door Closers
Sized
(Sizes 2,3,4,5,6)
UNI-TJ52BC UNI-TJ152BC
UNI-TJ53BC UNI-TJ153BC
UNI-TJ54BC UNI-TJ154BC
UNI-TJ55BC UNI-TJ155BC
UNI-TJ56BC UNI-TJ156BC
Multi-Sized
(Sizes 3 thru 6)
UNI-TJ51
UNI-TJ151
(Sizes 1 thru 4)
UNI-TJ51BF
UNI-TJ151BF
CA
UTION
AN INCORRECTLY INSTALLED OR IMPROPERLY
ADJUSTED DOOR CLOSER CAN CAUSE
PROPERTY DAMAGE OR PERSONAL INJURY.
THESE INSTALLATION INSTRUCTIONS SHOULD
BE FOLLOWED TO AVOID THE POSSIBILITY OF
MISAPPLICATION OR MISADJUSTMENT.
CA
UTION
!
!
!
!
NOTE: For special applications a separate door and frame preparation template is packed with these instruction. Use this
instruction sheet for installation sequence and closer adjustments only.
It is recommended that the door, on which the door closer will be installed, be hung on ball bearing hinges. Door must swing
freely.
Door and Frame must be properly reinforced, or use of special fasteners employed, to prevent the mounting screws from pulling
out.
All dimensions are given in inches with corresponding metric dimensions (millimeters) in parenthesis.
Right Hand Door - RH
Left Hand Reverse - LHR
Hinge edge of door
Left Hand Door - LH
Right Hand Reverse - RHR
Right Hand Door - RH
Left Hand Reverse - LHR
Left Hand Door - LH
Right Hand Reverse - RHR
Components
Pinion Cap
Power Adjustment Screw (3/16 Hex Drive)
“BC” Valve
Closer
Size
Stamp
“L” Valve
“S” Valve
Optional Cover
Hinge edge of door
Hinge edge of door
Hinge edge of door
Non Hold Open &
Hold Open (TJ150) Models
Series UNI-TJ50
UL Listed for Fire Doors
Door Stop...Door Closer
Series UNI-TJ150
(On-Off Hold-Open Control) Not UL Listed
Door Stop...Door Holder...Door Closer
2 sex-nuts
Holder Control
Slide Unit
Rod Screws
Main-Arm
Screw
Rod Unit
(Arm Number
Stamp)
Optional Thru-Bolt
&
Grommet Nuts
These installation instructions cover either of the models illustrated.
